Re: Mitsubishi HC7900 ISF Modes

Re: Mitsubishi HC7900 ISF Modes

Home Forums Calibration Discussion By Brand Mitsubishi HC7900 ISF Modes Re: Mitsubishi HC7900 ISF Modes

#3072
Anonymous
Inactive

ISF Mode codes for the HC7900/HC8000

These are from Mitsubishi. I hv not tried them, but shd be correct.

To enable ISF setting.

1. Display the IMAGE menu.

2. Select ADVANCED MENU by pressing the ▲ or ▼ button.

3. Press the “AUTO POSITION” → “ENTER” → “AUTO POSITION” button.

・ The screen for entering the password appears.

4. Enter a 8 digit password using the ▲, ▼, ◄ or ► buttons on the remote control

as shown below.

(▲=1, ►=2, ▼=3, ◄=4)

・ ISF lock release password is “1”, “3”, “4”, “2”, “4”, “3”, “1”, “2”

5. Press the ENTER button.

・ If you enter a wrong password, an error message appears.

・ To cancel the procedure, press the MENU button.

・ If password is correct, the lock is released, can set the ISF.

To store the ISF settings

Another set value can respectively be saved by ISF(DAY) and ISF(NIGHT).

1. Display the IMAGE menu.

2. Select PICTURE MODE by pressing the ▲ or ▼ button.

3. Press the ◄ or ► button to select ISF(DAY) or ISF(NIGHT) to store the settings.

4. Press the ENTER button.

・ Confirmation dialog appears.

・ To cancel the setting, press the MENU button.

5. Press the ENTER button.

・ Dialog appears and store the ISF settings.