Re: Nec 60″ TV Plasma

Re: Nec 60″ TV Plasma

Home Forums Calibration Discussion By Brand Nec 60" TV Plasma Re: Nec 60″ TV Plasma


@Alan Brown 3622 wrote:

What you have is a wide XGA display. Such resolution comes from the computer industry, rather than the video industry. Large format WXGA displays are fundamentally targeted toward the digital signage and large computer/graphics monitor market. Most likely the resolution is 1024 x 768 (stretched wide with non-square pixels- usually smaller display sizes), 1280 x 768, or, hopefully, 1366 x 768. In case of the latter resolution, you would theoretically preserve more resolution from a 1080i video signal than a 720p video signal. Most critical in displaying actual picture information best, will be the quality of the scaling in the display itself. Only trial and error, with comparing native 720p versus 1080i resolution patterns, would reveal by eye which signal would be best to feed the display. Some scaling processors might handle a native progressive signal better than an interlaced signal, resulting in less digital scaling artifacts, especially with motion. You would have to determine what the best case scenario is for that particular display.

Best regards and beautiful pictures,
Alan Brown, President
CinemaQuest, Inc.
A Lion AV Consultants affiliate

“Advancing the art and science of electronic imaging”

yes its 1366 x 768 and support 1080i patters but the problem that I did not have to access the service menu for the Color Management
the only to adjust is the CMS and I send email to NEC but no reply at all so I adjust what I have in the menu.

I have the report but the problem I can’t attach it saying error in this page but other way the client that is the Co-Producer he saw the different
the picture much sharper and better color then was before.

I try attach the report because the green was out of way!!