Re: RCA CRT M134 Chassis
Home › Forums › General Chit Chat and Other Stuff › RCA CRT M134 Chassis › Re: RCA CRT M134 Chassis
Actually did a little more checking on the service manual and found it. Icluded below, direct from the service manual. Maybe someone can include it in the proper section?
Entering the Service mode
1. Enter the service mode (S-Mode) by pressing the VOLUME
DOWN key on the instrument until the volume
decreases to minimum.
2. Press the INFO key on the remote handset while holding
the VOLUME DOWN key on the instrument.
3. Press the PROGRAM UP/DOWN buttons to select the
different adjustments under the first menu and press the
VOLUME UP/DOWN buttons to adjust the setting
(value).
5. Press the OK button to toggle into the Main Menu selection
mode and select the different Main menu sections
using the PROGRAM UP/DOWN buttons. Press the
OK button again to toggle back into the value adjustment
mode.
6. Menus up to menu 19 can be selected directly using the
remote control by pressing digital buttons 1~9, 0, notebook,
CAP, Display, Sleep, Calendar, System/INS,
Favourite, Return and Picture.
7. Press the Sound button to save the new settings and exit
the service mode.
Note: Many factory alignments appear in the menus but
only the ones listed here can be changed. The values
can be accessed and the value (hex number) on the
screen can be changed but the actual value the
instrument is using cannot be changed except at the
factory using special equipment.
The following is a list of all the menus and a
description of the individual adjustments under
each Main menu that can be changed. Only the
following menu items can actually be adjusted.
Menu 1 (Remote key: 1)
Item Remark
RC R cut-off setting
GC G cut-off setting
BC B cut-off setting
GD G drive setting
BD B drive setting
Menu 2 (Remote key: 2)
Item Remark
HIGH6 60Hz height
VP60 Vertical position
VLIN6 60Hz Vertical linearity
VSC6 Vertical S correction (60Hz)
Menu 3 (Remote key: 3)
Item Remark
HPOS6 Horizontal position (60Hz)
PARA6 Parabola
TRAP6 Trapazoid
HSIZE Horizontal size
CNRT6 Corners top
CNRB6 Corners bottom
Menu 4 (Remote key: 4)
No adjustments allowed
Menu 5(Remote key: 5)
No adjustments allowed
Menu 6(Remote key: 6 )
No adjustments allowed
Menu 7( Remote key: 7)
No adjustments allowed
Menu 8 (Remote key: 8 )
Item Remark
RFAGC RFAGC [12H, bit 5 ~ 0]
Menu 9 – 24
No adjustments allowed