Sony LCD/SXRD Type RPTV Displays

[Anonymous]

“always try to use the original TV remote where possible. Things like Harmony remotes and other all in one remotes may not have all the buttons you need to press”

* Particularly for the SpyderTV Pro users, the grayscale items for doing white balance are also located in the normal user menu in the Advanced section. Calibrate the grayscale from there and write down the values for future reference.

* Using the remote control:

* With the TV off.

* Press DISPLAY … 5 … VOL up … Power (or DISPLAY … 5 … Power )

* The Service Menu will be displayed in green letters

* Use the “Jump” button to cycle through the 3 or 4 menu pages to get to the page with the big green “crude” fonts … this is where the White Balance parameters are found

* Use numbers “1” and “4” keys to cycle the items up and down
* Use numbers “3” and “6” to change the value of the data

* Press “MUTE” then “ENTER” on the remote to save new settings

* “WRITE” in red will show up in the upper right corner if saved successfully

** On some LCD units, the menu pages must be changed to the original one you saw when entering in order to properly. If this is not done, the service parameters will show up in the normal user mode image and cannot be removed until the exit sequence is done correctly.

* Power off to exit the service menu.

** Additional notes: Multiple Grayscale memories are possible on the SXRD LCOS type units. Cool, Neutral, Warm 1, Warm 2 all have separate memories. To access these … change the Color Temp in the user menu and the preset values in the service mode will change accordingly.

Topic