Sony LCD

Sony LCD

This topic has 3 replies, 2 voices, and was last updated 17 years, 7 months ago by Gregg Loewen.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
September 25, 2008 at 3:46 pm #237

Anonymous
Inactive

I tried the calibration tip for Sony LCDs, and while I can get into the service menu, I can’t seem to make adjustments and navigate to different options with the 1 -3 and 4-6 button presses. It looks like the tip was posted a while ago, is there any updated or additional info for new models?
Thanks,
John Sciacca

September 25, 2008 at 5:39 pm #1160

Gregg Loewen
Keymaster

on newer models, use the user menu.

You also have to use the Jump command to get to one of 4? menu systems. Once at a menu system then use the 1-3 and 4 and 6 controls.

September 27, 2008 at 3:30 pm #1161

Anonymous
Inactive

I’ve tried this on two separate Sony sets. My first problem is, there is a ton of red data that shows up in the middle of the screen that does not seem to go away, making it impossible to take a reading of the window pattern. Second, sometimes the proper adjustment will come up (GDRV, RCUT, etc.) but when I change off of it with 1 or 3, to scroll to the next thing, it goes away and doesn’t come back. I could send you some screen shots if it would help.
John

September 27, 2008 at 3:46 pm #1162

Gregg Loewen
Keymaster

please take this discussion to a discussion area…not the service code data base area.

Threads in this area are listed alphabetically not by date. Discussion is this area is too easy to become lost / not answered.

thanks
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.