Re: About HDCP with Murideo.

Re: About HDCP with Murideo.

Home Forums Calibration Discussion By Brand About HDCP with Murideo. Re: About HDCP with Murideo.

#3236
Gregg Loewen
Keymaster

First,
ensure the Murideo is set to RGB Video, or 444/420/422
Then
if you can not see below step 16, (after increasing the brightness control), look for a setting on the PJ that will allow you to see below step 16. This may be the HDMI setting, sometimes a picture mode.

Not all PJs will allow for a below step 16 signal to be shown on the screen…ie JVC PJs do not allow for this in the THX mode. That is okay, just set the black level so the steps above 16 are barely visible.