@stephen_roach 2174 wrote:
I could NOT get my Sencore VP403csh to communicate with the WD65731….
1st tried to connect via Component 2 (YPrPb) input. Signal Type = HDTV/SDTV-DVI, No pattern at 480i,480p,720p,1080i
Based on what you posted above, you tried to put a digital signal (HDTV/SDTV-DVI) into a analog YPbPr Component Port on the RPTV, thus no video as the TV did not know what to do with the digital signal on the analog ports.
You need to go to Signal Type on the Sencore where you have it on HDTV/SDTV-DVI (as most probably do as the default) and hit the + button. You should see 4 other selections, one being HDTV/SDTV-YPbPr. Choose the button next to that.
@stephen_roach 2174 wrote:
2. use the Sencore’s VP403’s Display Data Channel (DDC) Test feature to see if it’s receiving the Extended Display Identification Data (EDID) from the display via YPrPb and HDMI. If it isn’t, then I guess the issue must be with the Miti. If I is receiving EDID then what are my choices?
No EDID is transmitted via analog YPbPr ports.
