Re: DP Hi-Lite Cine 260HC

Re: DP Hi-Lite Cine 260HC

Home Forums Calibration Discussion By Brand DP Hi-Lite Cine 260HC Re: DP Hi-Lite Cine 260HC

#2786
Anonymous
Inactive

I put my hands on this PJ couple days ago.
This PJ has very few accessible controls for calibration. Just RGB gains and cuts.
Out of the box picture is OK but not perfect. Errors ~10%, Gamma ~2 (Film) but color luminance is perfect, like after calibration. The best I have seen so far .(OTB) There are however saturation errors.
Manual says that RGB Gamma is 2.5, but after switching to RGB gamma wet down to 1.8, so I have chosen Gamma Video. After grayscale calibration I got average Gamma 2.43, delta E under 3 and color delta e 2000 under 2.
I am disappointed that 30k PJ doesn’t have 10 point grayscale adjustments. It could help to make it perfect.
There is a software for color gamut correction; ColourMax. It should help to make gamut perfect by correcting saturation.
I will calibrate this PJ in client house after it’s used for 100÷150 hours so result should be even better. I may come to conclusion than I don’t need more controls to make it perfect. I let you know.

Regards