Re: JVC RS 25 35 950 990 PJ Software interface
Some notes about doing gamma with the interface to make things go easier.
Switch calman to a 20 or 21 data point layout 5/10/15/20 … so forth
Use the 16 point Gamma selection.
Remember that the 16 points do not correspond to any particular gray box % …
Point 8 seems to impact around the 60% range.
Take your pick but it is better to work on either the bright end of things first or the dark end of things. Easier for your brain to grasp it.
So take point 8 … 9… 10 … 11 … 12 … down a number of points … and this will increase the gamma number … make sure you press the apply all colors button when done.
Now go and bright up gray patterns from 55% up to 100% and measure it all in 5% increments. The gamma numbers should start to come up …
Chances are you will be doing this for 5 or so iterations before you are happy with where the gamma ends up.
Now move onto the dark end of things. Points 7/6/5/4/3 … may end up leaving 1 and 2 alone.
Your instrument won’t work too well when you get to the 5% to 15% patterns so use your eyes here to look for color errors.
Bring down the points and then run a sweep from 15 to 60% and see what is happening. Keep massaging it until you are in whatever range you are aiming for. I try to keep things in the 2.25 to 2.4 range …