@Charles Cooper 3948 wrote:
Since no one’s jumping in…
It sounds like the color control is targeting saturation…luminance much less so. You did not mention what was happening to Delta E 94/2000 …but this is key. Also, where were you coming in with the blue filter method (blue only mode?)?
Lastly…brightness set?…only double checking because of the dark gamma on the bottom end and you did not mention it along with the others that you did.
Hi, thanks
Yeah, actually my fault was to ignore the blue only mode, that could save me a lot of time. Regarding colour, I have only this to show you what happened with the colours, when I turned the colour from 50 to 84 setting:
http://i1281.photobucket.com/albums/a509/Plutotype/C550-colourat84_zps4956c2f7.jpg
Whitepoint was very close to 6504 and the RGB histogram was excellent, with the mentioned small issue at 10% ( dE was 0-1 from 90%-20%, dE at 10% was 5 ). Calibrated in total darkness, brightness was set to 55, as there was no issue with the black pluge and turning brightness to 55 helped a lot to gamma curve in the darker parts. It may be correctable with more experimenting, but It was a non-issue in comparison to the colour problem.
Peter
