Re: Samsung PS50C550 plasma – setting correct color/tint

Re: Samsung PS50C550 plasma – setting correct color/tint

Home Forums Calibration Discussion By Brand Samsung PS50C550 plasma – setting correct color/tint Re: Samsung PS50C550 plasma – setting correct color/tint

#2860
Anonymous
Inactive

Greetings

No there isn”t any guide to changing the model number. If you get into the SM and bum around, you might see it. Then you are on your own there.

Color control on TVs both shrink and expand the triangle as well as make (some) colors brighter when those can’t expand anymore. Tint pretty much just rotates the triangle clockwise and counterclockwise … as was demonstrated in the class.

Setting color with a meter … done based on the color red. Increase or decrease color until red gets to close to zero. Then measure all the other colors to see how they were impacted. If doing this leaves some colors still too bright and others too dim … then you just eyeball it with your reference material. and that is all you can do.

If you want to adjust gamma or contrast or brightness to affect the color saturation, I will come and slap you for not listening in class. 🙂

Canvas – Paint … Canvas – Paint

cell light setting on plasma sets should be at max … be it 10/10 or 20/20.

For a refresher of all the important material covered in the class, it is highly recommended that you consider the 26 part Video Calibration Training series.

regards