Re: Sharp LCD Flat Type Displays
· ..Power Down at the panel.
· ..Hold down INPUT and Vol+ on the panel . Turn on the Plasma at the Panel.
· ..The Service Menu will come up. Scroll down using the arrow keys.
· ..To exit, power it down.
From the “Off” State, turn ON the Power while holding down the INPUT and VOL DOWN buttons located in the LCD Display Unit.
1-Cursor Up-Returns to previous page
2-Cursor Down–Proceeds to the next page
3-Volume up Key–Increases Adjusted Value by 10
4-Volume down Key–Increases Adjusted Value by 10Cursor Right–
5- Cursor Right (Increases the adjusted value by 1)
6- Cursor Left (Decreases the adjusted value by 1)
7-Channe1 l Up Key
8-Channe1 2 Down Key
Hold down the Vol- and Ch- bottons at the set simultaneously, and then plug the panel into the AC outlet. This will bring up a K on screen. Then hit Vol- and Ch- simultaneously again, which will bring you to the first page of the Service Menu. The rest of the navigation procedure remains the same. .