BenQ SH960

BenQ SH960

This topic has 5 replies, 2 voices, and was last updated 11 years, 11 months ago by Anonymous.

Creator

Topic
January 21, 2013 at 5:18 am #679

Anonymous
Inactive

Does anyone have any experience with this unit? Does anyone know the ISF access code?
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
January 25, 2013 at 4:59 am #2789

Anonymous
Inactive

Well after 7 calls to BenQ, I now know how to get to the ISF/Expert Mode. Not sure if I should post it, but PM me if you want it.

The expert mode uses a CCA type adjustment for the gamut. It has a place to enter the coordinates for the “desired” coordinates as well as the measured coordinates for WRBGCMY. It also has a luminance adjustment for each. Additionally, it has two controls I’m not familiar with call “Measured BC1 and Measured BC2”. Does anyone have information on what these may be?

Thanks.

January 25, 2013 at 10:31 pm #2790

Anonymous
Inactive

BC = brilliant color … leave them alone.

You will find that the CCA is not a precise beast in the BenQ projectors. It is off enough that the CCA is treated like just any other CMS system except you use x,y Y to achieve what you want.

regards

January 26, 2013 at 1:50 am #2791

Anonymous
Inactive

Thanks Michael. If you do multiple iterations with the CCA, does it get better or worse?

January 26, 2013 at 6:52 am #2792

Anonymous
Inactive

It gets better, but what you really do is feed in those measured numbers and force the desired numbers to the “real” place where they need to be.

In some ways you could just save your time and just force the desired numbers to where they need to be and forget about the measured part.

regards

January 26, 2013 at 5:37 pm #2794

Anonymous
Inactive

Thanks again Michael.
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.