Daylight

CalMan 4.0

CalMan 4.0

Home › Forums › General Chit Chat and Other Stuff › CalMan 4.0

  • Creator
    Topic
  • May 22, 2010 at 11:42 am #417
    Anonymous
    Inactive

    Ok, with the impending release of CalMan 4.0 on Monday (I do believe), it might be informative and worth posting on this site how to download and run the software independently without interferring with v3.6 or v3.7 or whatever you have. For those in the know, do you just download it as you normally would or do you have to send it to a speacial folder created? I, for one, wish to keep the current version of CalMan running in addition to 4.0. Reason I ask is that I recently downloaded 3.7 just to try it out to see if I liked it as I was quite happy with 3.5 (I am CalMan old school…I remember the days of 3.0…man those were the days :)). I sent it to a special folder, but it still sought out and destroyed my version 3.5 leaving me stuck with 3.7. All worked out fine this time, but previous version downloads have not been so lucky. Needless to say, I was PO when this happened. Anyway, thanks to anyone who can provide info! 🙂

  • Creator
    Topic
Viewing 14 replies - 1 through 14 (of 14 total)
  • Author
    Replies
  • May 22, 2010 at 6:06 pm #1748
    Anonymous
    Inactive

    All of our updates are upgrades over the existing version. But with v4 since it is a all new code base it will have it’s own updates and does not overwrite v3. So yes both v3 and v4 can be installed and used at the same time.

    May 22, 2010 at 6:15 pm #1749
    Anonymous
    Inactive

    Thank you Derek! 🙂

    May 29, 2010 at 8:57 am #1761
    Anonymous
    Guest

    appears that Calman 4.0 is released as it is on their website and available for download.

    http://www.spectracal.com/downloads.html

    May 30, 2010 at 5:25 pm #1766
    Anonymous
    Inactive

    I downloaded v4.0RC1 and opened in WinXP. Error. Here is the info:

    EventType : clr20r3 P1 : calmanv4.exe P2 : 4.0.0.73 P3 : 4bfdac4d
    P4 : presentationframework P5 : 3.0.0.0 P6 : 470bc696 P7 : 660b
    P8 : e1 P9 : system.windows,markup.xamlparse

    May 30, 2010 at 6:42 pm #1767
    Anonymous
    Inactive

    @Desmond Chow 2039 wrote:

    I downloaded v4.0RC1 and opened in WinXP. Error. Here is the info:

    EventType : clr20r3 P1 : calmanv4.exe P2 : 4.0.0.73 P3 : 4bfdac4d
    P4 : presentationframework P5 : 3.0.0.0 P6 : 470bc696 P7 : 660b
    P8 : e1 P9 : system.windows,markup.xamlparse

    Yea, we seem to be having a problem with non-english installs that did not show up in beta testing. I’m working on this all weekend until we find an answer.

    May 31, 2010 at 7:02 am #1769
    Anonymous
    Inactive

    @derekjsmith 2040 wrote:

    Yea, we seem to be having a problem with non-english installs that did not show up in beta testing. I’m working on this all weekend until we find an answer.

    Thanks Derek. I’ll try to install on a Win7 64bit (CHT) OS then and see if it works.

    May 31, 2010 at 9:10 pm #1771
    Anonymous
    Inactive

    Hello Gentlemen,

    I just wanted to ask if there will be a ‘THX’ branded version of the new CalMAN 4.0 software for us THX calibrators as there was with the last version? Thanks,

    May 31, 2010 at 9:33 pm #1772
    Anonymous
    Inactive

    no…but there will be some THX branded layouts for V4 in the near future.

    May 31, 2010 at 10:33 pm #1773
    Anonymous
    Inactive

    @Chris Tapia 2044 wrote:

    Hello Gentlemen,

    I just wanted to ask if there will be a ‘THX’ branded version of the new CalMAN 4.0 software for us THX calibrators as there was with the last version? Thanks,

    The plan is to create a THX workflow as an add-on to the base v4 release. The THX workflow add-on will only be available from here for download.

    June 4, 2010 at 6:28 pm #1777
    Anonymous
    Inactive

    Has the THX Workflow been added for download yet

    June 4, 2010 at 11:24 pm #1780
    Anonymous
    Inactive

    it’s in the RC2 version … out in the open for the moment. a work in progress as some parts of the program do not work right yet …

    Eventually, the workflow reports will definitely identify the type of display that is being calibrated and the meter that was used for the calibration.

    Think of the ones you see on RC2 as the prototypes … which will be refined later on as the program itself is whipped into better shape.

    regards

    June 9, 2010 at 4:30 am #1803
    Anonymous
    Inactive

    The RC3 is out now and more stable. IT has not crashed on any of the 6 computers that I am running it on at home.

    What I did do for now was identify Phone #1 and Phone #2 areas as the TV maker and model number. The probe used for the calibration will also show up in the report as will the person’s name.

    The workflows are still in prototype stage … but here is one that will be added soon enough. The next version of the THX complete flow …

    for now, I wouldn’t really bother with the THX CMS file or the THX Grayscale file. The THX complete one should take care of most needs …

    If you don’t like the report pages … feel free to design your own. 🙂

    Notice that I don’t walk you through the process like on the ISF side. You guys do not need any hand holding … just do it. 😀

    Regards

    June 17, 2010 at 6:53 pm #1825
    Anonymous
    Inactive

    I downloaded v4.0RC3 and opened in WinXP (CHT). Same Error as thread no. 5 I posted.

    July 13, 2010 at 2:51 pm #1867
    Anonymous
    Inactive

    The final release of CalMAN v4.0 is up on our server.

    http://www.spectracal.com/download_CalMAN.html

  • Author
    Replies
Viewing 14 replies - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.

Alliance Members

PVA Recommended Products