- This topic has 12 replies, 6 voices, and was last updated 7 years, 10 months ago by Anonymous.
January 26, 2012 at 6:15 am #595AnonymousInactive
I need to visit my clients sooner or later.
Anybody has done the calibration for Epson 6010?
January 27, 2012 at 1:58 pm #2466AnonymousInactive
Not yet, but the menu system on the 61000 is the same as every other epson HT projector out there. Expect the same menu as the 9700 or 8700.
RegardsJanuary 29, 2012 at 4:30 am #2469AnonymousInactive
Just did a 6010 today. Exactly the same as 8700 and 9700.
RegardsApril 15, 2012 at 2:10 am #2556AnonymousInactive
How was the PQ on the 6010? I am thinking of buying one.April 15, 2012 at 6:41 pm #2557AnonymousInactive
Nice, but typical of epson and the lcd tech. Best black levels so far, but the jvcs still have it beat.
the multipoint cnvergence is a waste of time.
regardsApril 16, 2012 at 7:08 am #2559AnonymousInactive
Thanks for the reply.April 16, 2012 at 6:06 pm #2560Gregg LoewenKeymaster
multi point convergence works very well. You need to do the firmware update to make it work correctly.April 16, 2012 at 6:31 pm #2561AnonymousInactive
is the firmware update just on the epson site?April 17, 2012 at 1:11 pm #2562Gregg LoewenKeymaster
I will ask that Epson surf by and add it to this site.
Also, the convergence will change a lot if mounted upside down. ( I am told this is by design).April 17, 2012 at 9:34 pm #2565AnonymousInactive
That would be great if you could have them add it here.
Thanks.April 19, 2012 at 9:41 pm #2567AnonymousInactive
As you may know Epson Support has a new Firmware V104 to fix an issue with the LCD Alignment feature on the PowerLite Home Cinema 5010/5010e and PRO Cinema 6010 projectors, when the projector is ceiling mounted and the projection mode is set to “Front/Ceiling” or “Rear” mode the orange box that comes up in the LCD Alignment screen is not where the adjustments on the screen are made. The lines being adjusted are in the opposite corner to the orange Box. The new firmware V104 corrects this issue.
We have recently started providing Firmware v104 update kits to Epson Dealers and End users. For the Epson Dealers, we have been “seeding” the kits with them, so they are keeping the kits and should be able to perform the update for users who cannot do it themselves.
End users who request a kit must agree send the kit back within 10 business days after they receive it. We have a limited number of kits and we need to be able to turn them around. We are including a return envelope and label.
We now also have the Firmware V104 files Zipped and posted on the EPSON FTP server for customers that already have a mini-USB cable and a Windows XP PC.
The link or FTP path to the FW 104 files is here:
Or if you have trouble, you can also navigate to this link:
ftp://ftp.epson.com/drivers/ , and look for File name = epson14639-FW104.zip
You will need the following Hardware Requirements for the FW104 Update:
– A PC with; Windows 98SE / Windows Me / Windows 2000 / Windows XP
(Note Windows Vista / 7, and Macintosh OS X are not supported at this time)
– An available USB port
– Approximately 20MB of free Hard disk space.
– A mini-USB cable (type A to mini-B)
If you need a FW104 kit, or need help with the installation / instructions, please call the Epson PrivateLine at 1-800-637-7661 (Requires a PIN authorization – use PIN#5039673). Let the support Rep know that you need a FW 104 kit or assistance performing the FW104 update and ask to speak with someone in the Advance Product Support (APS) group.
The PrivateLine is available from Monday through Friday 6AM-8PM (PT) and Saturday 7AM-4PM (PT)
If you have trouble with the PrivateLine #, you can also speak with a projector support specialist by calling US: (562) 276-4394 from Monday through Friday 6AM-8PM (PT) and Saturday 7AM-4PM (PT) or Canada: (905) 709-3839, 6AM to 6PM, Pacific Time, Monday through Friday (except holidays). Again ask to speak with someone in the (APS) group.
Once you have performed the FW104 update, please refer to the User’s Guide for info on how to perform the LCD Alignment.
A link to the PL PC 6010 UG is here, See Page 51:
A link to the PL HC 5010 UG is here, See Page 52:
Please know that I may not be able to check this forum daily or reply to your questions in timely manner, but I will try to post info as I get it, and try to answer when I can.
I also request that you do not ask for me personally when calling in, any one of my co-workers in the APS group will be able to assist you.
Thank You and Best Regards,
Tony Cort, CTS, THX (cert in progress)
Advanced Product Support
Epson America Inc.April 19, 2012 at 9:55 pm #2568AnonymousInactive
Q: How do I verify the firmware version on my Epson PowerLite Home Cinema 5010/5010e / PRO Cinema 6010 projector?
A: Please see the FAQ posted at this link:
Q: The LCD alignment function on my Epson PowerLite Home Cinema 5010/5010e / PRO Cinema 6010 projector does not work properly with the projector mounted on the ceiling. What is wrong?
A: Please see the FAQ posted at this link:
For a mini-USB cables that have been tested and approved to work with your projector.
Company Description Part Number
MonoPrice 15ft USB 2.0 A Male to Mini-B 5pin Male 28/24AWG 8636
CablesToGo 2m USB 2.0 A to Mini-b Cable 27005
Note: The required mini-USB cable is commonly used by many devices such as digital cameras, camcorders, cellphones, and MP3 players. However, the cable is in-expensive and can be purchased easily on-line. Epson does not certify, endorse, or guarantee the performance of these products. Please contact the vendor for any warranty or support issues with the product.December 10, 2013 at 9:48 pm #2315AnonymousInactive
Have there been any further updates to the 6010 Firmware or was this it?
- You must be logged in to reply to this topic.