Insignia

Insignia

  • This topic has 2 replies, 2 voices, and was last updated 13 years ago by Anonymous.
  • Creator
    Topic
  • #274
    Anonymous
    Inactive

    * Turn the TV on.
    * Press and hold the {VOL-} button on the TV.
    * Press and hold the {9} button on the remote.
    * The Service Menu will be displayed.

    * Use the {CH+} or {CH-} buttons to select the item.
    * Use the {VOL+} and {VOL -} buttons to adjust the value.
    * Turn the set off to exit the Service Menu.

    _________________________________________________________________

    * Press the {MENU} button on the remote.
    * Press the {PRECH} button 5 times on the remote.
    * The Service Menu will be displayed.
    * Use the numbered buttons to move through menus.

    _________________________________________________________________

    * Press the {SLP} {MUTE} {AV} {MENU} buttons on the remote.
    * The Service Menu will be displayed.
    * Use the number buttons to toggle through the setup pages.

    Use {CH+} {CH -} buttons to move through the selections.
    Use {VOL+} {VOL -} buttons to change the settings.

    Or:

    Use {DOWN} {UP} buttons to move through the selections.
    Use {LEFT} {RIGHT} buttons to change the settings.

    * Press the {0} or {SPL} buttons to exit.

    <<<< WARNING - WARNING - WARNING - WARNING >>>>
    Don’t change anything on the following options in menu 4:
    DEFLECT 0 – 03
    DEFLECT 1 – 05
    If you change any value of the above menus, the screen
    will go black and you won’t be able to get the picture
    back to normal without sending the TV to a repair shop.

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • #1301
    Anonymous
    Inactive

    Hi

    What models are you referring to?
    I have NS-LCD19 and nothing works.

    Regards

    #1302
    Anonymous
    Inactive

    This is a generic service menu code I had for insignia….not 100% sure what models it works on.

Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.