Mitsubishi DLPs and CRT RPTVs

[Gregg Loewen]

xx315: 0357 0359
xxx15: 2457 2459 (xx515, xx615, xx815)
xx525, xx725, xx825: 2457 (2470 sub menu)
To access the service menus for each model, using your remote, press “Menu” then the code for your model:

Model Video Geometry

XXX03 2357 2359

XXX05 1257 1259

XXX07 8257 8259

XXX08 8257 8259

XXXX9 0157 0159

XXX11 2257 2259 without integrated tuner
2157 2159 with integrated HD tuner

XXX13 0357 0359 with or without integrated tuner

The above models designate the year by removing XXX and adding the first three numbers from your model, e.g. – XXX13 could be 65613, 65413, etc.

Topic

[Gregg Loewen]

on the dlp displays:
Menu 2457
hit enter to save
hit menu to exit

[Anonymous]

Greg:
I’m able to get into the service screen (I think) for our Mitsubishi DLP set, but I can’t navigate. When I type the code 2457 in, the screen pops up with this info:
ISF
Doubler
324 0x06B b08-b00 40

I can’t navigate to select ISF calibration (which is what I assume I want). I’ve tried every key on the remote. Any suggestions? The only thing that I can change is the 40. Pressing up or down on the remote changes the value (39, 41, etc.)
Thanks,
John Sciacca

[Gregg Loewen]

use the audio and video buttons.
One of them jumps to each menu, the other does the individual items in each menu.
You then use the cursor up and down buttons to change the parameter value.
Hit the enter button to save.
Hit the menu button to exit.

[Anonymous]

Thanks, Greg. I see it now.
I can navigate to GGH, GRH, GBH–which I assume are the high level adjustment.
GGL, GRL, GBL—which I’m guessing are the low adjustments.
There is also a BMB, BMR, BNB; do I do anything with those or stay away?
Thanks again for all the help.
John

[Gregg Loewen]

BMB, BMR, BNB

No idea

GGH vs GGL is for Gain Greeen High vs Low. So there are 2 color temps for adjustment. They are gobal. some of the Mits have 3 High Med and Low.

I adjust High to 9300, Med to 7500 and Low to D 65.

[Anonymous]

Hello Gregg,
I am calibrating a Mitsubishi WD-57731.
In reading prior posts, I do not see whether or not the power is on or off when the menu button is pressed on the remote. I also do not see any mention of a model ending in XXX31. Do you happen to have any updated info?

[Anonymous]

Hello Gregg,
Got into the menu using Menu 2457. I can select parameters and adjust values however, I am currently in GGL, GRL, and GBL and I cannot adjust the values. I have also noticed that there is more than one GGL, more than one GRH, GBH, of which all of these parameters have a setting of 0 and cannot be adjusted. Any ideas?

[Gregg Loewen]

please list the entire SM items then.

YOU SHOULD NOT BE POSTING THIS IN THIS AREA. THIS IS NOT A DISCUSSION AREA. PLEASE POST QUESTIONS IN A DISCUSSION AREA.

thanks

[Author]

Replies