mitsubishi hc7000

mitsubishi hc7000

Home Forums General Chit Chat and Other Stuff mitsubishi hc7000

  • Creator
  • #296

    I was just wondering if anyone know s how to access the service menu for the mitsubishi hc7000 lcd projector, and if there is access to a color management system in the service menu.



Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
  • #1294

    Grayscale should be in the user menu … if like other recent mits projectors.



    Micheal is correct….here is the procedure:

    To adjust the tone of white (To customize the color temperature):
    To customize (and store) the color temperature to your preference, carry out the following procedure.

    1. Select COLOR TEMP. in the IMAGE menu.

    2. Press the < or > button to select USER .

    3. Press the ENTER button.

    4. Press the ^ or v button to select REFERENCE.

    5. Press the < or > button to select basic color temperature.
    Generally, select the most preferable color temperature from the preset
    color temperature.

    6. Press the ^ or v button to select the desired item.

    7. Press the < or > button to adjust the selected item.

    8. Repeat steps 6 and 7 for optimum adjustment results.

    Straight from the User’s Manual.

    Hope this Helps

    Gregg Loewen

    hi guys
    Ray, thanks for moving.
    Once here for about a week or so (and all parties have read it) it is good to move it to the Service area.


    I’ve already calibrated the grayscale, I was actually trying to find out if there was a service mode to access a CMS system, so I could adjust the color gamut as it is slightly skewed with a lean towards yellow in the green spectrum. Thanks.

Viewing 4 replies - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.