Panasonic PT-AE4000 LCD projector 2010

Panasonic PT-AE4000 LCD projector 2010

Home Forums Calibration Discussion By Brand Panasonic PT-AE4000 LCD projector 2010

  • This topic has 0 replies, 1 voice, and was last updated 14 years ago by Anonymous.
  • Creator
    Topic
  • #427
    Anonymous
    Inactive

    Did one of these in depth last night.

    Two point grayscale that leads into advanced Gamma that has 9 points. Y-R-G-B (Do not pick gamma simple)

    The CMS now appears to work correctly as you can pick RGBCMY and do it the traditional way. You have to keep saving it before you can take a reading to see what the changes you made … did to the image.

    Try calibrating in Cinema 1 mode to start.

    Found that calibrating to 80/30 left 90/100 with much higher dE values. Suggest calibration with 100/30 and then fine tune the grayscale with the 9 point gamma that goes from 10 to 90% … denotes as 1-2-3 … 9

    Played with CMS for a short time … then looked at jennifer to make sure the system was working right … or wrong. Then continued to tweak cms.

    regards

  • You must be logged in to reply to this topic.