Panasonic TH58PZ800U

Panasonic TH58PZ800U

This topic has 3 replies, 3 voices, and was last updated 15 years, 11 months ago by Anonymous.

Creator

Topic
April 20, 2009 at 10:54 pm #310

Anonymous
Inactive

Hi guys,

I am going to be calibrating a Panasonic TH58PZ800U this Friday and wondered if there was anything special I should know about? Do I need a code to get into the THX mode? Are there any do’s and don’ts?

Thank you,
Josh
Creator

Topic

Viewing 3 replies - 1 through 3 (of 3 total)

Author

Replies
April 21, 2009 at 2:21 am #1330

Anonymous
Inactive

Hello Josh,

No, no special code to get into THX. It should be in the presets. Calibrate only in the THX mode. The gamma curve in the other modes is pathetic at best. No CMS, the THX mode should have a more correct color gamut…but it isn’t perfect. Make sure you change the mode to Cinema in the service menu each time you enter it. It will always default to vivid from my experience. Exit the service mode by turning off the TV, then turn it back on to check your measurments. Panasonics can be a pain to calibrate…especially the higher IRE’s. Watch for color shifting in the higher IRE’s as well. Good luck!

April 21, 2009 at 4:55 am #1331

Anonymous
Inactive

remember to press enter to save all your changes in the service mode. or else they only stay in the service mode and do not reflect back into the user mode.

regards

April 23, 2009 at 3:52 pm #1338

Anonymous
Inactive

The calibration was bumped out to a later date. Thank you for your help, I will let you know how it goes.
Author

Replies

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.