Planar 8150 DLP PJ

Planar 8150 DLP PJ

This topic has 5 replies, 3 voices, and was last updated 15 years, 5 months ago by Anonymous.

Creator

Topic
March 1, 2009 at 3:18 pm #297

Gregg Loewen
Keymaster

Very straight forward. preselectable color gamuts that are accurate. You will need to tweek the gray scales.

Select user mode 1 or 2 then copy this to the ISF Day or Night modes.

The code to access ISF modes is: Up Enter Down.
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
April 23, 2009 at 12:21 am #1333

Anonymous
Inactive

This is the same ISF code to enter into the 8130 menu as well. However, my experience with this unit is not one I can recommend. Color and tint do not work…you can’t adjust them(why they have them there as options…who knows). The engineers have stated they will not be coming out with a firmware to fix his problem. In addition, light output, even in torch mode, is less than optimal. I recorded about 8 ft/lamberts in torch mode at 100 IRE. You may need to get a higher gain screen. The one I calibrated was on a 1.0 to 1.1 gain screen.

April 23, 2009 at 4:12 am #1334

Anonymous
Inactive

How wide was the screen?

April 23, 2009 at 6:39 am #1335

Anonymous
Inactive

92″…not very big.

April 23, 2009 at 1:50 pm #1336

Anonymous
Inactive

By “this unit” are you referring to the 8130 or the 8150?

April 24, 2009 at 3:38 am #1343

Anonymous
Inactive

The 8130. The unit I worked on was also a change out as the first unit had a serious processing defect.
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.