Question about dE average in Calibration Report.

Question about dE average in Calibration Report.

This topic has 5 replies, 4 voices, and was last updated 12 years, 2 months ago by Anonymous.

Creator

Topic
July 17, 2012 at 5:18 pm #638

Anonymous
Inactive

Can someone explain this?

I notice that for the dE average, the report uses the 10% stimulus reading to compute the average and the program shows the average without using the 10% stimulus reading. I was showing dE at 1.3 during my Cal. and my report shows 2.6. Why is that?
Regards,
Louie
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
July 17, 2012 at 7:28 pm #2633

Gregg Loewen
Keymaster

hi Louie,
Can you do a screen grab or post a copy of the report ?
I will ask Tom to come by and assist.
thanks

July 17, 2012 at 7:45 pm #2634

Anonymous
Inactive

I think that you have answered you own question. The small difference in averaging is because the report uses 10% stim and the app stops at 20%. In the next version we will extend the app to 10% as well.

July 17, 2012 at 9:53 pm #2635

Anonymous
Inactive

I was having trouble uploading the report. My concern is…What if I had a dE of 2.9 during my calibration and when I submit my report it shows a dE of say 3.9. Will it be approved? Is there any way of not having the report use the 10% stimulus?

July 17, 2012 at 9:57 pm #2636

Anonymous
Inactive

WE disregard the 10% anyway because of meter inaccuracies

July 17, 2012 at 10:06 pm #2638

Anonymous
Inactive

I see…Thank you very much for the help everyone!
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.