Daylight

Samsung A800B

Samsung A800B

Home › Forums › Calibration Discussion By Brand › Samsung A800B

  • Creator
    Topic
  • February 23, 2010 at 1:33 pm #378
    Anonymous
    Inactive

    i have one of these coming up
    can anyone confirm that
    Menu Quick Info Exit Power-On
    works on the customers remote or do i need another to get in using the factory codes
    anything else to note for these?

  • Creator
    Topic
Viewing 12 replies - 1 through 12 (of 12 total)
  • Author
    Replies
  • February 23, 2010 at 5:52 pm #1595
    Gregg Loewen
    Keymaster

    Ill ask Alan to assist you.
    I have not worked on one.

    February 23, 2010 at 6:07 pm #1596
    Anonymous
    Inactive

    I haven’t tried that method, since I have a service remote. I’ll give it a try and report back.

    February 23, 2010 at 11:00 pm #1597
    Anonymous
    Inactive

    I just tried it twice and that method does not work. Perhaps the authorized dealer can obtain a service remote for you.

    February 24, 2010 at 6:40 pm #1599
    Anonymous
    Inactive

    Mark,
    Is this the same as the samsung DLP service codes?
    If so..I have a pronto CCF file that has it…if you have a pronto TSU1000.

    I will know tomorrow……but I may also have 2 pronto TSU1000’s for sale with all my service codes on it..if anyone is interested.

    RayJr

    April 13, 2010 at 8:25 pm #1678
    Anonymous
    Inactive

    I have a Pronto TSU2000 w/Ray’s codes, but i couldn’t get the Samsung to respond to either Info or Service Mode
    i am going to have to load a device i have here to check that it is ab;e to send IR codes (unless i am missing something else?)

    mark

    April 14, 2010 at 12:49 pm #1679
    Anonymous
    Inactive

    Alan,

    How do you access the SM on this PJ?

    mark

    April 14, 2010 at 3:29 pm #1680
    Anonymous
    Inactive

    As an authorized local dealer, I have a service remote. Part of the requirements of being a dealer is to have access to the tools and skills to install and calibrate the projector properly. I am bound under an NDA to not distribute the remote codes. If an owner of the 800/900 series needs a calibration, they will need to contact a dealer for assistance. These are protected products, marketed in a manner that supports qualified dealers who commit to carry them.

    April 15, 2010 at 5:05 pm #1668
    Anonymous
    Inactive

    Projectror remote sequence is as follows:
    Menu – Return – Info – Exit – Power On
    must be done with projector off.

    Alan can you please check this?

    Thanks

    April 15, 2010 at 5:35 pm #1681
    Anonymous
    Inactive

    There is no “Return” button on the projector remote.

    April 15, 2010 at 5:43 pm #1682
    Anonymous
    Inactive
    RayJr;1907 wrote:
    Projectror remote sequence is as follows:
    Menu – Return – Info – Exit – Power On
    must be done with projector off.

    Alan can you please check this?

    Thanks

    Here is picture of remote for the A800B
    samsung-3.jpg

    April 15, 2010 at 6:01 pm #1683
    Anonymous
    Inactive

    Sorry about that! I’m not at my office and my assistant grabbed the wrong remote while I tried coaching him over the phone. I just called him back. He was able to call up the service mode using the sequence you suggested, this time using the right remote.

    April 16, 2010 at 1:43 pm #1684
    Anonymous
    Inactive

    Thanks guys
    saves me an extra trip

    mark

  • Author
    Replies
Viewing 12 replies - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.

Alliance Members

PVA Recommended Products