Samsung LCD/LED 6400

Samsung LCD/LED 6400

Home Forums Calibration Discussion By Brand Samsung LCD/LED 6400

  • Creator
    Topic
  • #729
    Anonymous
    Inactive

    Having trouble with 10pt Calibration, I see the option to turn it on and then it has an option for Interval 1-10 which I’m assuming is 10%-100% and then an RGB for each interval

    I was trying to make adjustments to 80 to start with so I set interval to 8 and and no adjustments made any change on the meter reading. (so then I also tried 7 and 9 for kicks with same result). Bottom line it calibrated great from 30-100 with a 2pt but I wanted to do a 10pt and see if there was a difference.

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • #3010
    Gregg Loewen
    Keymaster

    do the 2 point first, then turn on 10 point. Start at 100 and work done. Measure the entire run after you do an adjustment.

    #3011
    Anonymous
    Inactive

    And keep the contrast high or be aware that the controls won’t adjust the level they are supposed to and compensate accordingly (hard to do, but possible). The 10 point controls mistrack progressively as the contrast is turned down.

Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.