Daylight

Panasonic VT30

Panasonic VT30

Home › Forums › Calibration Discussion By Brand › Panasonic VT30

Viewing 4 posts - 61 through 64 (of 64 total)
1 2 3 4 5
  • Author
    Posts
  • May 30, 2012 at 11:27 am #2615
    Gregg Loewen
    Keymaster

    Start in THX Mode for a reference image.

    May 30, 2012 at 3:17 pm #2616
    Anonymous
    Inactive

    The advanced gamma in the VT30 is messed up … best to leave it at default position. It really messes with fleshtones … this is even on the latest FW.

    Use THX mode as the reference mode and custom/isf as your day mode. (as mentioned by Gregg)

    regards

    June 1, 2012 at 12:05 pm #2617
    Anonymous
    Inactive

    @Gregg Loewen 3633 wrote:

    Start in THX Mode for a reference image.

    to get it to connect via IP, i need to access the PRO settings menu item, can’t do that in THX
    so, do you mean, activate the IP connection & then use the user menu to select THX & then activate/calibrate the ISF modes?

    mark

    June 5, 2012 at 2:55 am #2618
    Anonymous
    Inactive

    Not meaning to speak for Gregg or Michael, but what was meant is to calibrate THX mode first, in the service menu, just like on older/lower Panasonic plasma models. It will be just a 2 point white balance + user menu adjustment. Then connect via IP or serial and calibrate ISF Day if you really feel the need to tackle that. The ISF modes are tricky, tricky, tricky. But I do like them now that I’ve done a lot of them and refined my technique.
    BTW, did you see the custom workflow I made for the VT30’s ISF modes? It’s not perfect, but it can help you get better results. I made an original one and then an updated one for FW 2.1. It can be downloaded in CalMAN’s forum.

  • Author
    Posts
Viewing 4 posts - 61 through 64 (of 64 total)
1 2 3 4 5
  • You must be logged in to reply to this topic.