[Gregg Loewen]

turn off the SNI parameters for the displays that do not have a DNIe off control in the user menu.

[Gregg Loewen]

On the last generation or 2 of Hits crts:

Hold menu down on TV
Then hit menu 8 select on remote

There is no longer an ISF mode…but one of the catagories has all the settings.

[Gregg Loewen]

To enter ISF modes on the BenQ 9000 and 10000

Go to the ISF Selection: then enter isf night (it may be ISF Day) down up and enter

[Gregg Loewen]

For these models (the newest panels): PDP-4280HD, PDP-5080HD
and perhaps the 5010 (1080p units). The latest word from Pioneer is DO NOT TRY TO CALIBRATE using the service menu as the controls do not work as labeled. I have emailed Pioneer and have asked for clarification and updates.

Edit: See Michael’s note above….calibrate using the highs only…DO NOT TOUCH THE LOWS

[Gregg Loewen]

Here is some additional information on the non elite displays:

Once in the service mode hit mute until you see the panel factory mode. press enter, then cursor down until you see panel works 2, press enter again. now you should see r high g high b high r low g low b low, these are the gray scale controls. Hit menu to exit and then power off the display.

[Gregg Loewen]

hi
Added note:

STVPro2007 supports all Pioneer Elite plasmas via the RS232 “direct connect” interface.

Please note that newer Elites have TV Guide. This feature must be disabled (the setting is under the TVGuide Setup option, select auto off on turn on ).

[Author]

Posts