Gregg Loewen

Gregg Loewen

Forum Replies Created

Viewing 15 posts - 196 through 210 (of 471 total)
  • Author
    Posts
  • in reply to: ITU-R BT.1886 Gamma formula? #2440
    Gregg Loewen
    Keymaster

    hi
    short answer is yes.

    in reply to: Panasonic VT30 #2435
    Gregg Loewen
    Keymaster

    Tint doesnt exist, or shouldnt exist, if the color decoding is properly performed.

    in reply to: Sharp Elite 70" LCD (PRO70X5FD) #2432
    Gregg Loewen
    Keymaster

    hi
    I did a 70″ on Friday. I used the 2 point gray scale and then did CMS. I did not touch the red CMS controls. It looked very good when I was finished, perhaps just a touch too much magenta in the flesh tones but I was happy (and so was the client).

    in reply to: Sharp Elite 70" LCD (PRO70X5FD) #2418
    Gregg Loewen
    Keymaster

    the gamma bump on 90-100% is showing that the contrast is too high.

    This display does have issues (others have reported them too). Waiting on Sharp for a firmware update/

    Anybody else with suggestions ?

    in reply to: Runco CL-810 #2417
    Gregg Loewen
    Keymaster

    hi Jon!

    Bright scenes generally look great but whenever there is a really dark scene there is an unbearable amount of noise in the image. Could this be a dynamic range issue?

    This sounds like the black level isnt set correctly.

    in reply to: Display Consistency vs Absolute Calibration #2403
    Gregg Loewen
    Keymaster

    get the light output to match, get the 2 closest edges of the displays to match.

    Remember that if you are working with front projectors and screens with gain you, if you have 2 different viewing angles, you will see different results. Same goes for LCD panels relating to viewing angles.

    in reply to: Mitsubishi L75-A94 LaserVue 2p Grayscale Problem #2402
    Gregg Loewen
    Keymaster

    same as for all the Mits (of recent years).
    menu 2457, then use the video button to select the item.

    in reply to: Mitsubishi L75-A94 LaserVue 2p Grayscale Problem #2400
    Gregg Loewen
    Keymaster

    hi Buzz
    thanks!
    I noticed the same thing…i just did the WB in the service mode, then did the CMS in the adv menu. Seemed to work well this way.

    in reply to: Custom Case #2395
    Gregg Loewen
    Keymaster

    awesome!

    in reply to: Panasonic PTAE7000 #2383
    Gregg Loewen
    Keymaster

    hi Jeff
    Should be straight forward.
    have fun!!

    in reply to: Big Problems with a Panasonic GT30 #2382
    Gregg Loewen
    Keymaster

    hi Julian
    Nice Skyping with you.
    I am not sure what is going on. Perhaps the display is reading RGB vs 422.
    Try measuring off of a DVD and see if you get the same results.

    in reply to: Syntax Olevia LCD Panel #2376
    Gregg Loewen
    Keymaster

    hi Don
    2 pt WB and no CMS were typical controls for a TV of that vintage.

    in reply to: Lumagen Internal Test Pattens vs VideoForge/Oppo #2370
    Gregg Loewen
    Keymaster

    hi
    which pioneer? On the elites, use Color Space 2, (while setting the gray scale) and you will be on Rec 709

    Also make sure the pioneer correctly selects the 422 color space (in auto mode it may not). I am guessing that is your problem, or depending on Pioneer model, when you change sources, the pioneer is using different values in the user menu.

    in reply to: PTAE7000 projector how is it? #2368
    Gregg Loewen
    Keymaster

    hi guys
    I did a podcast yesterday with the AVforum guys where tey were absolutely raving about the Panny. Good stuff to hear. Also keep an eye out for the new Epson which will have limited release by Christmas. It looked amazing at CEDIA. I have not seen the new JVC, Panny, or Sony offerings to compare.

    in reply to: Notes on the Jeti Specbo Spectro and Plasma Sets #2366
    Gregg Loewen
    Keymaster

    awesome.
    Thanks for the update Tom!!

Viewing 15 posts - 196 through 210 (of 471 total)